Electrohome EAAC200 - Warnings; General Safety Warnings

2

Playing the Radio
1. Press the button once to turn radio ON.
2. Press and hold the AM/FM button to switch
between FM and AM.
3. Press the button to decrease and the
button to increase the volume.
4. Press the button to decrease and the
button to increase the AM /FM
frequency.
5. Press the button once to turn radio OFF.
To Set/Recall the
Radio Presets
You can preset and store the frequency of 20
radio stations in the memory; 10 AM stations
and 10 FM stations.
1. Press the button once to turn radio ON.
2. Press and hold the AM/FM button to toggle
between AM and FM radio.
3. Set radio to desired station.
4. Press and hold the SET button and P01 will
flash on the screen. (Use the and
buttons to select another preset [P01 -
P10]).
5. Press the SET button to confirm setting to
P01 or wait 5 seconds for flashing to stop.
6. Repeat the steps above to preset more
radio stations.
7. To recall a preset station, press the SET
button to toggle through the current preset
radio stations.