Electrohome EAAC470 - Page 16

- 16 -
To set ALARM 2, press the button once to view current alarm setting then press and
hold the button and alarm time will ash. The settings below will appear in the
following order:
AL 2 Hour > AL 2 Min > AL 2 Alarm Modes > AL 2 Radio Station > AL 2 Radio Volume
1. Press the / DST/°C °F buttons to decrease/increase the HOUR; press
to conrm the HOUR. The MINUTES will begin to ash.
2. Press the / DST/°C °F buttons to decrease/increase the MINUTES;
press to conrm the MINUTES. ALARM MODES will begin to ash.
The ALARM MODE settings are as follows:
1-5 : Monday to Friday 6-7 : Saturday & Sunday
1-7 : Whole week 1-1 : One day of week
NOTE: When selecting 1-1, you must select a specic day as follows: 1=Monday,
2=Tuesday, 3=Wednesday, 4=Thursday, 5=Friday, 6=Saturday, 7=Sunday
3. Press the / DST/°C °F buttons to toggle between the ALARM MODE
settings; press the button to conrm your selection; if 1-1 is selected, press
the
/ DST/°C °F buttons to toggle between the days of the week
and press the button to conrm your selection. The Wake options will begin
to ash.
4. Press the / DST/°C °F buttons to toggle between the Wake options
AM, FM or bu (buzzer); press the button to conrm your selection. The Alarm
Volume selection will begin to ash.
5. Press the / DST/°C °F buttons to decrease/increase the Alarm
Volume; press the button to conrm your selection.
To deactivate ALARM 1 and/or ALARM 2, press and hold the button and/or the
button until the LED is no longer visible on the front LED panel.
OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS