Electrohome EAAC470 - Setting Alarm 1 & Alarm 2

- 15 -
SETTING ALARM 1 & ALARM 2
To set ALARM 1, press the
button once to view current alarm setting then press and
hold the
button and alarm time will ash. The settings below will appear in the
following order:
AL 1 Hour > AL 1 Min > AL 1 Alarm Modes > AL 1 Radio Station > AL 1 Radio Volume
1. Press the
/ DST/°C °F buttons to decrease/increase the HOUR; press
the
button to conrm HOUR. The MINUTES will begin to ash.
2. Press the
/ DST/°C °F buttons to decrease/increase the MINUTES;
press the
button to conrm MINUTES. ALARM MODES will ash.
ALARM MODES allows you to set more than one alarm in a week i.e. ALARM 1 set to
wake you Monday-Friday and ALARM 2 set to wake you on weekends. The ALARM MODE
settings are as follows:
1-5 : Monday to Friday 6-7 : Saturday & Sunday
1-7 : Whole week 1-1 : One day of week
NOTE: When selecting 1-1, you must select a specic day as follows: 1=Monday,
2=Tuesday, 3=Wednesday, 4=Thursday, 5=Friday, 6=Saturday, 7=Sunday
3. Press the
/ DST/°C °F buttons to toggle between the ALARM MODE
settings then press the
button to conrm your selection; if 1-1 is selected,
press the
/ DST/°C °F buttons to toggle between the days of the
week and press the
button to conrm your selection. The Wake options will
begin to ash.
4. Press the
/ DST/°C °F buttons to toggle between the Wake options
AM, FM or bu (buzzer); press the
button to conrm your selection. The Alarm
Volume selection will begin to ash.
5. Press the
/ DST/°C °F buttons to decrease/increase the Alarm
Volume; press the
button to conrm your selection.
OPERATING INSTRUCTIONS