Electrolux Professional NHT8

Questions and Answers

N
nicholsonmichaelAug 6, 2025
How to fix no water in Electrolux Professional Dishwasher?
- R
  Ruth CookAug 6, 2025
  If your Electrolux Professional Dishwasher isn't filling with water, several factors could be at play. First, ensure that the tap is fully open. If it is, the water inlet filter might be clogged, requiring a thorough cleaning. Another potential cause is insufficient pressure in the hydraulic circuit; verify that the mains pressure meets the minimum requirements. Lastly, for models without a drain pump, check that the overflow is correctly inserted.
W
winterssarahAug 17, 2025
What to do if Electrolux Professional Dishwasher has inefficient drainage?
- W
  wbestAug 17, 2025
  If your Electrolux Professional Dishwasher is draining inefficiently, start by removing the overflow. Also, check the waste outlet pipe and overflow aperture for any obstructions, and clear them to ensure proper drainage.
M
Melissa SchmidtAug 27, 2025
Why is the tank water level too high in Electrolux Professional NHT8 Dishwasher?
- A
  Ashley RobinsonAug 27, 2025
  If the tank water level is too high in your Electrolux Professional Dishwasher, it's likely due to a blockage in the waste outlet pipe or the overflow aperture. Clear any obstructions from these areas to resolve the issue.

Summary

Hood Dishwasher Installation Manual

Installation Manual Overview

Indicates the document is an installation manual and includes original instructions and compliance information.

Installation Diagram - Single Skin, No ESD

Installation Diagram - Single Skin, With ESD

Installation Diagram - Single Skin, With Drain Pump

Installation Diagram - Single Skin, With Drain Pump and ESD

Installation Diagram - Double Skin, With Drain Pump

Installation Diagram - Double Skin, With Drain Pump and ESD

Installation Diagram - Automatic, With Drain Pump

Installation Diagram - Automatic, With Drain Pump and ESD

Installation Diagram Legend

Foreword and Safety Introduction

Important Safety Precautions

Highlights crucial safety warnings and the manufacturer's disclaimer for operations not following manual instructions.

Safety Information and General Warnings

General Safety Practices

Defines general safety rules for operating the machine, including user supervision and keeping children away.

Personal Protection Equipment (PPE)

Transport, Handling, and Storage

Installation and Assembly Procedures

Water Connection Requirements

Specifies water supply connection procedures, including pressure, hoses, and dual check valve.

Electrical Connection Guidelines

Instructions for safe electrical connections, emphasizing qualified personnel and adherence to regulations.

Machine Cleaning and Maintenance

Service and Warranty Information

Disposal Procedures

General Information and Definitions

Machine Identification Data

Details on how to locate and interpret the machine's dataplate for technical and manufacturer information.

Appliance Identification Details

Technical Data Identification

How to identify the machine's technical specifications and performance data from its dataplate.

Interpreting Factory Description

Explanation of the factory description elements found on the machine's dataplate.

Understanding Type Reference Codes

Guide to decoding the machine's type reference based on the codes provided on the dataplate.

Manufacturer Responsibility and Manual Management

Technical Data Specifications

Power Supply Characteristics

Transport, Handling, and Storage Introduction

Transport and Handling Instructions

Storage and Unpacking Guidelines

Installation and Assembly Overview

Customer Responsibilities and Site Prep

Customer duties for installation, including power supply, water, and site preparation.

Appliance Space and Positioning

Defines required clearance and correct positioning of the appliance at the installation site.

Extraction Hood and Packing Disposal

Information on extraction hood requirements and environmentally sound disposal of packing materials.

Plumbing Connections and Circuits

Water Inlet and Outlet Connections

Specific steps for connecting water inlet pipes, drain pipes, and associated fittings.

Electrical Connections

Energy Control Wiring

Instructions for connecting an external energy consumption control system to the machine's terminals.

Safety Devices and HACCP

Detergent and Rinse Aid Dispenser Setup

Liquid Detergent Dispenser Setup

Instructions for setting the dosage and initial filling of the liquid detergent dispenser.

Rinse Aid Dispenser Setup

Instructions for setting the dosage and initial filling of the rinse aid dispenser.

Electrical Connections for External Dispensers

Control Panel Functions

Wash Cycle Selection Buttons

Explanation of buttons for selecting wash cycles 1, 2, and 3, and their recommended uses.

Special Cycle and Mode Selection

Details on activating drain/self-cleaning, deliming, and productivity/compliance modes.

Guaranteed Rinse System and Basic Controls

Commissioning and Pre-Checks

Electrical and Plumbing Checks

Verification of electrical connections, power supply, and plumbing for safe operation.

Filter and Wash Arm Fitting

Instructions for checking the correct installation of filters, overflow, and wash/rinse arms.

Basic Machine Setup and Dispenser Adjustment

Manual Activation Procedures

Guide to manually activating components and initial setup for optimal washing performance.

Detergent and Rinse Aid Dispenser Settings

Procedure to access programming mode and adjust detergent and rinse aid dispenser parameters.

Dispenser Parameter Configuration

External Dispenser Notes

Specific guidance for using external dispensers, including setting parameters in seconds and special values.

Continuous Water Softener System

Salt Container Management

Details on the salt container, its importance for softening, and when to refill it.

Filling the Salt Container

Step-by-step instructions for filling the salt container with coarse salt, including safety precautions.

Troubleshooting Common Alarms

Water Supply and Drainage Issues

Troubleshooting for 'NO WATER' and 'INEFFICIENT DRAINAGE' anomalies, addressing supply and obstructions.

Service Required Alarms

Alarms indicating issues that require immediate attention from the service centre.