12
Setting Oven Controls
To set the control for Continuous Bake or 12 Hour Energy
Saving
1. Press and hold or for 6 seconds.
"- -:- -"
will appear,
"TIMER"
will flash and a beep will be heard (Figure 1). After 6 seconds a beep will
sound and
"12h"
(Figure 2) or
"- - h"
(Figure 3) appears in the display.
2. Press or to switch between the 12 Hour Energy Saving and
continuous bake features. Note:
"12h"
in the display indicates the control
is set for the 12 Hour Energy Saving mode and
"- - h"
indicates the
control is set for the Continuous Bake feature (Figures 2 and 3).
3. Press to accept the change (Figure 4; display will return to time
of day) or press or to reject the change.
SETTING CONTINUOUS BAKE OR 12 HOUR
ENERGY SAVING
The or and or pads control the Continuous Bake or 12 Hour Energy
Saving features. The oven control has a factory preset built-in 12 Hour Energy Saving feature
that will shut off the oven if the oven control is left on for more than 11 hours and 59 minutes.
The oven can be programmed to override this feature for Continuous Baking.
Figure 1
Figure 2
Figure 3
Figure 4
TIMER
UPPER
ROAST
LOCKED
WARM
BAKE
DELAY
CONV
BROIL
TIMED
UPPER
TIMER
REMOVE
LOWER
DOOR
RACKS
CLEAN
CONV
BROIL
TIMED
WARM
BAKE
DELAY
LOWER
ROAST
LOCKED
UPPER
ROAST
LOCKED
WARM
BAKE
DELAY
CONV
BROIL
TIMED
UPPER
TIMER
REMOVE
LOWER
DOOR
RACKS
CLEAN
CONV
BROIL
TIMED
WARM
BAKE
DELAY
LOWER
ROAST
LOCKED
To Next Page
Loading...
