Electrolux 42 - Installation Components and Site Requirements

Installation Instructions
16
HARDWARE SUPPLIED
• Anti-Tip brackets
Anti-Tip Brackets
MATERIALS REQUIRED
• 36″ long, 2″ x 4″ wood block for Anti-Tip
bracket installation
• #12 or #14 wood screws for Anti-Tip bracket
• Screws to secure refrigerator to cabinets
• 1/4″ O.D. copper water line tubing.
• Water shutoff valve
• Custom panels for doors and grille panel
(if installing custom panels)
• Special 3M Dual Lock adhesive strips for
1/4″ side panels (if installing side panels)
36″ Wood Block 1/4″ O.D. Copper Water Line
Tubing
TOOLS REQUIRED
• Tinsnips to cut banding
• Stepladder
• Bucket
• Level
• Appliance dolly
• Tubing cutter
• Flathead screwdriver
• 1/2″ open-end wrench
• #2 Phillips screwdriver
• Drill and appropriate bits
• 7/32″, 1/2″ sockets
• Safety glasses
• 7/16″ open-end wrench
• Pliers
Appliance Dolly
Stepladder
Safety Glasses
Water Shutoff Valve #12 or #14
Wood Screws
Screws
Special 3M Dual Lock
Adhesive Strips
Custom Panels
Sockets
Open-end Wrenches Bucket
Drill & Bits
Flathead Screwdriver
Tubing Cutter
Phillips Head
Screwdriver
Level
Pliers
Tinsnips