29
INSTRUCTIONS FOR REPLACING COMPONENTS (to be
carried out only by an authorised installer).
VALVE
• Remove the knobs and control panel.
• Unscrew the pilot and thermocouple pipe.
• Unscrew the gas inlet and outlet connections.
• For installation carry out the same procedure in reverse
order.
THERMOCOUPLE, PILOT BURNER ASSEMBLY
• Remove the knobs and control panel.
• Unscrew the pilot and thermocouple pipe.
• Replace the component.
FRYTOP MAIN BURNER
• Remove the knobs and control panel.
• Remove the clamp fixing the burner to the gas pipe and
nozzle holder.
• Unscrew the pilot and thermocouple pipe.
• Unscrew and remove the main burner closing sheet.
• Remove the burner and replace it.
For installation carry out the same procedure in reverse order.
1.2 MAINTENANCE SCHEDULE
• It is advisable to have the appliance inspected by an
authorised person at least every 12 months. For this
purpose, it is advisable to stipulate a servicing contract.
AUSTRALIA
For service and spare parts, please contact:
Electrolux - Tom Stoddart Pty Ltd
To Previous Page
Loading...
