B3.5 POSITIONING AND ADJUSTMENT OF FEET
It is important that the COMPACT stands level, and stands firm to achieve this the feet must be adjusted.
• Using a pipe wrench (or similar) unscrew the tube visible above the feet, clockwise when viewed
from above. This tube acts as a locking nut to set the foot once adjusted.
OUTER TUBE
FOOT
• By hand adjust the feet to level the machine, take care not to unscrew them too far and detach them
from the machine frame.
OUTER TUBE
FOOT
• Once the machine is level retighten the outer tubes (counter clockwise when viewed from above),
using a pipe wrench or similar, to fix the position of the feet.
OUTER TUBE
FOOT
• Ensure machine stands firm and does not rock, check with spirit level.
Page 9 of 20
To Next Page
Loading...
