Electrolux Competence Series - 4.1.3 Clock (Simple Electronic Timer)

- 12 -
TSE-N 01.01 A. B. 599 50 86 62 EN
Wiring diagram with spindle
position;
stop, left
Fig. Wiring diagram
The temperature can be selected according to the knob position.
After beginning of work, contact 1-2 is closed.
To check the thermostat, measure the temperature in the muffle. Determine the following
temperatures:
- Hot air 160 °C ± 15 °C
- Conventional 200 °C ± 15 °C
- Pyrolysis 485 °C ± 20 °C
If a temperature is found which is beyond the tolerance value, replace the thermostat.
4.1.3 Clock (simple electronic timer)
Functions of the programmable clock:
Display of time
Short-time alarm-clock
Automatic function for baking and frying times
(For more details please refer to chapter 5, operation of setting and operating units)