Electrolux DMSL8350UO - Page 18

• you do not deactivate a cooking zone or
change the heat setting. After some time,
the hob deactivates.
The relation between the heat setting / fan
speed setting and the time after which the
appliance deactivates:
Heat setting The hob deactivates
after
1 - 2 6 hours
3 - 4 5 hours
5 4 hours
6 - 9 1.5 hours
Fan speed setting The hood deacti‐
vates after
10 hours
1 - 3 10 hours
6.2 Pause
This function sets all cooking zones that
operate to the lowest heat setting. The speed
of the hood fan decreases to 1. When you
activate the function while the hood operates
in the automatic mode, the speed of the hood
fan will not be reduced.
When the function operates, and can
be used. All other symbols on the control
panels are locked.
The function does not stop the timer
functions.
1. To activate the function: press .
The heat setting is lowered to 1. The speed of
the hood fan decreases to 1.
2. To deactivate the function: press .
The previous heat setting / fan speed setting
comes on.
6.3 Lock
You can lock the control panel while the hob
operates. It prevents an accidental change of
the heat setting / hood speed setting.
Set the heat setting / hood speed setting first.
To activate the function: press
.
To deactivate the function: press again.
The function deactivates as you
deactivate the hob.
6.4 Child Safety Device
This function prevents an accidental
operation of the hob and the hood.
To activate the function: press . Do not
set any heat setting / hood setting. Press and
hold for 3 seconds, until the indicator
above the symbol appears. Deactivate the
hob with .
The function stays active when you
deactivate the hob. The indicator above
is on.
To deactivate the function: press . Do
not set any heat setting / hood setting. Press
and hold for 3 seconds, until the indicator
above the symbol disappears. Deactivate the
hob with
.
Cooking with the function activated: press
, then press for 3 seconds, until the
indicator above the symbol disappears. You
can operate the hob. When you deactivate
the hob with the function operates again.
6.5 Flexible induction cooking area
WARNING!
Refer to Safety chapters.
FlexiBridge function
The flexible induction cooking area consists
of four sections. The sections can be
combined into two cooking zones with
different size, or into one large cooking area.
You choose the combination of the sections
by choosing the mode applicable to the size
of the cookware you want to use. There are
three modes: Standard, Big Bridge, and Max
Bridge.
18 ENGLISH