Step 1 Turn off the oven and wait until it
is cold to clean it.
Remove the shelf supports.
Step 2 Grab the grill corners. Pull it for‐
wards against the spring pressure
and out of two holders. The grill
folds down.
Step 3 Clean the oven ceiling with warm
water, a soft cloth and a mild de‐
tergent. Let it dry.
Step 4 Install the grill in the opposite se‐
quence.
Step 5 Install the shelf supports.
11.5 How to remove and install: Door
You can remove the door and the internal glass panels to clean it. The number of glass panels
is different for different models.
WARNING!
The door is heavy.
CAUTION!
Carefully handle the glass, especially around the edges of the front panel. The
glass can break.
Step 1 Fully open the door.
Step 2 Lift and press the clamping
levers (A) on the two door
hinges.
Step 3 Close the oven door to the first opening position (approximately 70° angle). Hold the
door at both sides and pull it away from the oven at an upwards angle. Put the door
with the outer side down on a soft cloth on a stable surface.
135/144
CARE AND CLEANING
To Next Page
Loading...
Need help?
General
