7www.electrolux.com
• The mains cable must not come into contact with any hot parts of the appliance.
• Do not immerse the appliance in water or any other liquid.
•
• This appliance is intended for domestic use only. The manufacturer cannot accept
any liability for possible damage caused by improper or incorrect use.
• Be careful when turning a steam iron upside down – there may be hot water in
the reservoir.
IRONING CHART
FABRIC TEMPERATURE SETTING IRONING RECOMMENDATION
Acrylic Dry iron on the wrong side.
Acetate Dry iron on the wrong side while still damp or use spray
to dampen.
Nylon & Polyester
Iron on the wrong side while still damp or use spray to
dampen.
Rayon
Iron on the wrong side of fabric.
Viscose
Mainly dry iron. Steam can be used under
manufacturer’s instructions.
Silk
Iron on the wrong side. Use an ironing cloth to prevent
shine marks.
Cotton blends
Check the label and follow the manufacturer’s
setting.
Wool & Wool blends
Steam iron on the wrong side or use ironing cloth.
Cotton Dry iron while still damp or use spray to dampen. Use
steam medium to high.
Corduroy
Steam iron on the wrong side or use ironing cloth.
Linen
to “MAX” Iron on the wrong side or use ironing cloth to prevent
shine marks, especially with dark colours. Dry iron while
still damp or use spray to dampen. Use steam medium
to high.
Denim
to “MAX” Use maximum steam.
table!
TIPS AND TRICKS
Temperature settings
The iron heats up faster than it cools down, so we recommend that you start ironing the fabrics requiring the lowest
are unsure about the fabric, start with a low temperature and iron on a hidden corner. Then increase the temperature
gradually if needed.
Avoiding marks on the fabric
Washing fabrics before ironing
If the washing machine is heavily loaded or the spin drying revolutions are very high, the fabrics may come out more
creased. However, many fabrics are easier to iron if they are damp.
To Next Page
Loading...
