To Next PageTo Next PageHow to fix Electrolux CompactPower EDBS7146GR Iron soleplate not heating?
If the Electrolux Iron's soleplate isn't heating, even when turned on, first check the main power supply cable, plug, and outlet for any connection issues. Also, ensure that the temperature control is not set to the 'MIN' position; adjust it to the appropriate temperature setting.
Why does my Electrolux CompactPower EDBS7146GR not produce steam?
If your Electrolux Iron isn't producing steam, there might be several reasons. First, ensure that the water tank has enough water. If it does, check that the steam control is set between the minimum and maximum steam positions, and that the selected temperature is high enough for steam use.
What to do if Electrolux Iron leaks water during ironing?
If water leaks from the soleplate of your Electrolux Iron during ironing, it's likely that the iron is not hot enough. Set the temperature dial to a suitable temperature for steam ironing ( to maximum). Put the iron on its heel and wait until the light has gone out before you start ironing.
Why is the steam jet function not working on my Electrolux Iron?
If the steam jet or vertical steam jet function on your Electrolux Iron isn't working, it could be due to overuse within a short period. Put the iron in a horizontal position and wait before using the steam jet function again. Also, ensure the iron is hot enough by adjusting to the proper temperature for steam ironing (up to ). Put iron in vertical position and wait until the temperature indicator light turns off.
Why does my Electrolux CompactPower EDBS7146GR leave brown streaks on my clothes?
If brown streaks are coming from the soleplate of your Electrolux Iron and staining your linen, it could be due to several factors. Avoid using chemical descaling agents. Fabric fibres may have accumulated in the holes of the soleplate and are burning, so clean the soleplate with a damp soft cloth. Also, ensure fabrics are properly rinsed, especially if garments are new and haven't been washed before ironing.
Why does my Electrolux Iron spit out flakes?
If flakes and impurities are coming out of the soleplate of your Electrolux Iron during ironing, it's likely due to using hard water, which causes scale flakes to develop in the water tank. Press and hold the steam button for about one minute to get steam. Then hold one more minute in order to clean the steam generating system. Iron an old towel to ensure any residues inside the iron are not transferred to the laundry.
Why is my Electrolux CompactPower EDBS7146GR Iron leaking water after storage?
If water leaks from the soleplate of your Electrolux Iron while it's cooling down or after being stored, it's probably because the iron was put in a horizontal position while there was still water in the tank. Empty the water tank and set the steam control to the 'off' position before storing the iron.
General| Brand | Electrolux |
|---|---|
| Model | CompactPower EDBS7146GR |
| Category | Iron |
| Language | English |
