Why is my Electrolux Iron soleplate not heating up?
If the soleplate isn't heating, first check the main power supply cable, plug, and outlet for any connection issues. Also, make sure the temperature control isn't set to the MIN position; if it is, select an adequate temperature.
Why does my Electrolux QUICKSTEAM leave brown streaks on linen?
Brown streaks may appear and stain the linen due to a few reasons. You might have used chemical descaling agents, which you should avoid. Fabric fibres might have accumulated and are burning in the soleplate holes, so clean the soleplate with a damp soft cloth. Also, fabrics might not be properly rinsed, or the garments are new and haven't been washed before ironing, so please rinse the laundry properly again.
What to do if my Electrolux QUICKSTEAM is not producing steam?
If your iron isn't producing steam, it could be due to a few reasons. First, ensure that there is enough water in the tank. If the water tank is full, check that the steam control is set between the minimum and maximum steam positions. Lastly, the selected temperature may be too low for steam; increase the temperature to at least the level specified for steam use.
What to do if Electrolux QUICKSTEAM Iron leaks water from soleplate during ironing?
If water leaks from the soleplate during ironing, the iron might not be hot enough. Set the temperature dial to a temperature ( to maximum) suitable for steam ironing. Put the iron on its heel and wait until the light has gone out before you start ironing.
Why does my Electrolux Iron leak water after being stored?
If water leaks from the soleplate after the iron has been stored, it's likely because the iron was put in a horizontal position while there was still water in the tank. To prevent this, empty the water tank and set the steam control to the off position before storing the iron.
What to do if my Electrolux QUICKSTEAM Iron steam jet is not working?
If the steam jet function isn't working, it could be because it was used too frequently within a short period. Put the iron in a horizontal position and wait before using the steam jet function again. Also, ensure the iron is hot enough by adjusting the temperature to steam ironing levels (up to ). Put the iron in a vertical position and wait until the temperature indicator light turns off.
General| Model | QUICKSTEAM |
|---|---|
| Type | Steam Iron |
| Power | 2400 W |
| Soleplate Material | Stainless Steel |
| Water Tank Capacity | 300 ml |
| Weight | 1.2 kg |
| Vertical Steam | Yes |
| Anti-Drip System | Yes |
| Anti-Calc System | Yes |
| Auto Shut-Off | Yes |
| Self-Cleaning | Yes |
Details safety warnings and cautions for appliance usage.
Provides general advice and helpful tips for using the appliance.
Information regarding the environmental impact and disposal.
Step-by-step guide on how to operate the steam station.
Instructions for cleaning the appliance without using detergents.
Guidelines on how to properly dispose of the appliance.
Explanation of the ThermoSafe™ hot base indicator feature.
To Next Page