To Next PageTo Next PageHow to fix an Electrolux Iron that is not heating up?
If your Electrolux Iron's soleplate isn't heating up, even when turned on, there might be a connection issue. Check the main power supply cable, plug, and outlet. Also, make sure the temperature control isn't set to the MIN position; if it is, select an appropriate temperature setting.
Why is my Electrolux EDBS3350 not producing steam?
If your Electrolux Iron isn't producing steam, ensure there's enough water in the tank by filling it. Check that the steam control is set between the minimum and maximum steam positions. Also, the selected temperature must be high enough for steam use; increase the temperature to at least .
What to do if steam jet function doesn't work on Electrolux EDBS3350 Iron?
If the steam jet and vertical steam jet function on your Electrolux Iron aren't working, it could be because the steam jet function was used too frequently within a short period. Place the iron in a horizontal position and wait before using the steam jet function again. Also, ensure the iron is hot enough by adjusting to the proper temperature for steam ironing (up to ). Put iron in vertical position and wait until temperature indicator light turns off.
Why does my Electrolux EDBS3350 leave brown streaks on my clothes?
If brown streaks are appearing on your linen while ironing with your Electrolux Iron, and staining the fabric, it could be due to several reasons. Avoid using chemical descaling agents. Fabric fibers may have accumulated in the soleplate holes and are burning, so clean the soleplate with a damp soft cloth. Ensure fabrics are properly rinsed, especially if garments are new and haven't been washed before ironing; rinse them again.
What to do if my Electrolux Iron leaks water while ironing?
If your Electrolux Iron is leaking water from the soleplate during ironing, the iron may not be hot enough. Set the temperature dial to a temperature suitable for steam ironing ( to maximum). Put the iron on its heel and wait until the light has gone out before you start ironing.
Why does my Electrolux EDBS3350 leak water after I store it?
If your Electrolux Iron is leaking water from the soleplate while cooling down or after being stored, it's likely because the iron was stored horizontally with water still in the tank. To prevent this, empty the water tank and set the steam control to the off position before storing the iron.
Why does my Electrolux EDBS3350 Iron spit out flakes?
If flakes and impurities are coming out of the soleplate of your Electrolux Iron during ironing, it's likely due to using hard water, which causes scale to develop in the water tank. To resolve this, press and hold the steam button for about one minute to get steam, then hold it for another minute to clean the steam generating system. Iron an old towel to ensure any residues inside the iron are not transferred to your laundry.
General| Type | Steam Iron |
|---|---|
| Soleplate Material | Stainless Steel |
| Water Tank Capacity | 300 ml |
| Auto Shut-Off | Yes |
| Self-Cleaning | Yes |
| Anti-Drip System | Yes |
Key information needed when contacting Electrolux customer service for assistance.
Detailed identification and description of all parts, controls, and indicators on the steam station.
Step-by-step instructions for preparing and setting up the steam station for its initial operation.
Instructions for normal use, adjusting steam levels, and managing water during operation.
Procedures for cleaning exterior surfaces and replacing the anti-calc cartridge.
Guidelines for safely storing the steam station when not in use.
Explanation of the ThermoSafe™ indicator's function for soleplate temperature monitoring.
Essential safety warnings covering user age, capabilities, electrical safety, and general handling.
Specific safety instructions regarding children's interaction with the appliance and its cord.
Guide to recommended temperature settings and ironing techniques for various fabric types.
Solutions for common issues such as the iron not heating or producing steam.
Guidance for fixing water leaks, soleplate impurities, and fabric stains during ironing.
Information on environmentally responsible disposal of the appliance and its battery components.
