Electrolux EDBS3350 - Electrolux Steam Station Ironing Chart; Fabric Type and Ironing Recommendations

8www.electrolux.com
• The appliance must only be connected to an earthed socket. If necessary an
extension cable suitable for 10 A can be used.
• If the appliance or the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualied person, in order to avoid
hazard.
• The iron must be used and rested on a stable surface. When placing the iron on
its stand, ensure that the surface on which the stand is placed is stable.
• Never leave the appliance unattended while connected to the supply mains.
• The appliance must be switched o and the mains plug withdrawn each time
after use, before cleaning and maintenance.
• The plug must be removed from the socket outlet before the water reservoir is
lled with water.
• The mains cable must not come into contact with any hot parts of the appliance.
• Do not immerse the appliance in water or any other liquid.
• Do not exceed the maximum lling volume as indicated on the appliances.
• This appliance is intended for domestic use only. The manufacturer cannot accept
any liability for possible damage caused by improper or incorrect use.
IRONING CHART
FABRIC TEMPERATURE SETTING IRONING RECOMMENDATION
Acrylic “nylon” Dry iron on the wrong side.
Acetate “nylon” Dry iron on the wrong side while still damp or use spray
to dampen.
Nylon & Polyester “nylon” Iron on the wrong side while still damp or use spray to
dampen.
Rayon “nylon” Iron on the wrong side of fabric.
Viscose “nylon” Mainly dry iron. Steam can be used under
manufacturer’s instructions.
Silk
Iron on the wrong side. Use an ironing cloth to prevent
shine marks.
Cotton blends
Check the label and follow the manufacturer’s
instructions. Use setting for the bre requiring lowest
setting.
Wool & Wool blends
Steam iron on the wrong side or use ironing cloth.
Cotton
Dry iron while still damp or use spray to dampen. Use
steam medium to high.
Corduroy
Steam iron on the wrong side or use ironing cloth.
Linen
to “MAX” Iron on the wrong side or use ironing cloth to prevent
shine marks, especially with dark colours. Dry iron while
still damp or use spray to dampen. Use steam medium
to high.
preciz.hu