22
Emptying the condensed
water container
Empty condensed water container after every drying
cycle.
When a programme is running and the condensed
water container becomes full, the programme is au-
tomatically interrupted and the message THE TANK
IS FULL, PLEASE EMPTY appears in the display. In
order to continue the programme, the condensed
water container must first be emptied.
1 Warning! The condensate is not suitable for
drinking or for preparing foodstuffs.
1. Take out drawer containing condensed water con-
tainer completely (1) and pull up the condensed
water container’s drainage pipe as far as it will go
(2).
2. Pour condensed water out into a basin or similar
receptacle.
3. Push drainage pipe in and refit condensed water
container.
If the programme has been interrupted as a result of
the condensed water container being full:
Press the START/PAUSE button to continue the dry-
ing cycle.
3 The condensed water container has a volume
of approx. 4 litres. This is sufficient for around
6kg of laundry which has previously been
spun at 800 revolutions/minute.
3 The condensed water be used as distilled wa-
ter, e.g. for steam irons. However first filter the
condensed water (e.g. with a coffee filter) to
remove any residues and small pieces of fluff.
To Next Page
Loading...
