Consumption values
Programme
1)
2)
Water (l) Energy (kWh) Duration (min)
30min 9.2 - 11.2 0.556 - 0.68 30
Pre-rinse 3.4 - 4.2 0.012 - 0.015 15
90min 9.6 - 11.7 0.886 - 1.083 90
ECO 9.9 0.936 227
AUTO Sense 9 - 12.8 0.694 - 1.223 120 - 170
Machine Care 8.8 - 10.7 0.46 - 0.562 60
1)
The pressure and the temperature of the water, the variations of the mains supply, the
options, the quantity of dishes and the degree of soil can change the values.
2)
The values for programmes other than ECO are indicative only.
Information for test institutes
To receive the necessary information for
conducting performance tests (e.g.
according to: EN60436 ), send an email
to:
info.test@dishwasher-production.com
In your request, include the product
number code (PNC) from the rating plate.
For any other questions regarding your
dishwasher, refer to the service book
provided with your appliance.
6. BASIC SETTINGS
You can configure the appliance by
changing basic settings according to
your needs.
Number Settings Values
Description
1)
1 Water hard‐
ness
From level 1 to
level 10 (de‐
fault: 5)
Adjust the level of the water softener ac‐
cording to the water hardness in your
area.
2 Rinse aid emp‐
ty notification
On (default)
Off
Activate or deactivate the rinse aid indi‐
cator.
3 End sound On
Off (default)
Activate or deactivate the acoustic signal
for the end of a programme.
4 Auto door open On (default)
Off
Activate or deactivate the AirDry.
5 Key tones On (default)
Off
Activate or deactivate the sound of the
buttons when pressed.
1)
For more details, refer to the information provided in this chapter.
You can change the basic settings in
setting mode.
When the appliance is in setting mode,
the indicators on the control panel
ENGLISH 9