Electrolux EEA727200L - Basic Settings

Programme
1)2)
Water (l) Energy (kWh) Duration (min)
Machine Care 10.1 0.608 60
1)
The pressure and the temperature of the water, the variations of the mains supply, the options, the quantity of
dishes and the degree of soil can change the values.
2)
The values for programmes other than ECO are indicative only.
Information for test institutes
To receive the necessary information for
conducting performance tests (e.g. according
to: EN60436 /BS EN60436 ), send an email
to:
info.test@dishwasher-production.com
In your request, include the product number
code (PNC) from the rating plate.
For any other questions regarding your
dishwasher, refer to the service book
provided with your appliance.
7. BASIC SETTINGS
You can configure the appliance by changing
basic settings according to your needs.
Number Settings Values
Description
1)
1 Water hardness From level 1 to level
10 (default: 5)
Adjust the level of the water softener according to the
water hardness in your area.
2 Rinse aid empty no‐
tification
On (default)
Off
Activate or deactivate the rinse aid indicator.
3 End sound On
Off (default)
Activate or deactivate the acoustic signal for the end
of a programme.
4 Auto door open On (default)
Off
Activate or deactivate the AirDry.
5 Key tones On (default)
Off
Activate or deactivate the sound of the buttons when
pressed.
1)
For more details, refer to the information provided in this chapter.
You can change the basic settings in setting
mode.
When the appliance is in setting mode, the
indicators on the control panel represent
available settings. For each setting, a
dedicated indicator flashes:
1 3 2
4 5
10 ENGLISH