Programme
1)
Water (l) Energy (kWh) Duration (min)
AUTO Sense 8.2 - 11.2 0.67 - 1.08 120 - 170
Machine Care 8.4 - 10.2 0.60 - 0.71 60
1)
The pressure and the temperature of the water, the variations of the mains supply, the
options and the quantity of dishes can change the values.
Information for test institutes
To receive the necessary information for
conducting performance tests (e.g.
according to EN60436), send an email
to:
info.test@dishwasher-production.com
In your request please include the
product number code (PNC) found on
the rating plate.
For any other questions regarding your
dishwasher please refer to the service
book provided with your appliance.
6. BASIC SETTINGS
You can configure the appliance by
changing basic settings according to
your needs.
Number Settings Values
Description
1)
1 Water hard‐
ness
From level 1 to
level 10 (de‐
fault: 5)
Adjust the level of the water softener ac‐
cording to the water hardness in your
area.
2 Rinse aid emp‐
ty notification
On (default)
Off
Activate or deactivate the rinse aid indi‐
cator.
3 End sound On
Off (default)
Activate or deactivate the acoustic signal
for the end of a programme.
4 Auto door open On (default)
Off
Activate or deactivate the AirDry.
5 Key tones On (default)
Off
Activate or deactivate the sound of the
buttons when pressed.
1)
For more details, refer to the information provided in this chapter.
You can change the basic settings in
setting mode.
When the appliance is in setting mode,
the indicators on the control panel
represent available settings. For each
setting, a dedicated indicator flashes:
ENGLISH 9
To Next Page
Loading...
