56 electrolux.com.au
Slot-in installation
The slot-in type installation use the appliance as supplied. The appliance can be mounted on a plinth. This enables a
continous cupboard kickboard to be installed, giving a more intergrated appearance. There is no clearance requirement
between oven and adjacent side cabinets.
600mm
900mm
minimum
755mm
900mm
This surface to be level with the top edge
of the kick board
600mm minimum
vertical clearance
from combustible
surfaces
INSTALLATION OF EFE914, EFEP916 & EFEP956 (CONTINUED)
To Next Page
Loading...
