EasyManua.ls Logo

Electrolux EFP 936 - Control Panel; Correct Ventilation

Electrolux EFP 936
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
Control Panel
The switches are arranged on the upper right side of the vapour catcher. (Fig. 1).
The hood is provided with a motor with continues speed regulation plus a position for intensive operation.
The blower is controlled by shifting the sliding
switch.
The extractor part (vapour catcher) of the hood is
used to switch the blower on and off when the
appliance is switched on (Motor).
When the vapour catcher of the appliance is
withdrawn (without preceding disengagement of
the hood via the switches), the set fan output is
automatically re-engaged.
If the extractor part is re-inserted without operation
of the switches, first the blower is switched off.
The lighting can be separately switched on and off
with the sliding switch.
Turn the hood on a few minutes before you start
cooking then you will get an underpressure in the
kitchen. It should be left on after cooking for about
15 minutes or until all odours have disappeared.
Correct ventilation
If the cooker hood is to work correctly there must
be an under pressure in the kitchen. It is important
to keep the kitchen windows closed and have a
window in an adjacent room open
0I0
Motor switch
Light switch

Related product manuals