17
Part Name Part Number
Triple crown burner body with injector (4.0) for City gas 376008100
Triple crown burner crown 389051201
Triple crown inner cap, enamel black 389051302
Triple crown outer cap, enamel black 389051402
Wok pan adaptor 376005000
9. TROUBLE SHOOTING
Fault Possible cause Remedy
-Gas supply valve turned off
-Control knob not on
-Wrong knob turned
-Turn on gas supply to appliance
-Turn knob on
-Ensure the knob you are turning
correspond to the burner you want
to light
-Port blockage in ignition
area
-Ensure that ports in ignition area
are clean and dry
Burner will not light even
though the spark plug is
working
-Ignition electrode wet or dry
-Sparking at wrong point
because of incorrectly fited
burner crown
-Dry or clean ignition electrode
-Ensure that crown is seated
property so that the spark fires to
the receiving point in burner crown
No spark is obtained when the
control knob is activated
-Battery is flat
-Polarity wrong on battery
-Ignition electrode wet or dry
-Replace battery
-Re-orient battery to correct
position
-Dry or clean ignition electrode
To Next Page
Loading...
