What to do if my Electrolux Hob isn't sparking?
If you're not getting a spark when you activate the control knob on your Electrolux Hob, it could be due to a few reasons: * The battery might be flat. Try replacing the battery. * The battery polarity might be incorrect. Re-orient the battery to the correct position. * The ignition electrode could be wet or dirty. Dry or clean the ignition electrode.
How to fix Electrolux EGG7422S burner that won't light?
If the burner on your Electrolux Hob won't light even when the spark plug is working, there are several potential causes: * The gas supply valve might be turned off. In this case, turn on the gas supply to the appliance. * The control knob might not be on. Turn the knob on. * You might be turning the wrong knob. Ensure the knob corresponds to the burner you want to light. * There could be a port blockage in the ignition area. Make sure that ports in the ignition area are clean and dry. * The ignition electrode might be wet or dirty. Dry or clean the ignition electrode. * The burner crown might be incorrectly fitted, causing sparking at the wrong point. Ensure the crown is seated properly so that the spark fires to the receiving point in the burner crown.
Why are the flames uneven on my Electrolux EGG7422S Hob?
Uneven or lifting flames on your Electrolux Hob can be caused by: * Blocked or wet flame ports. Clean or dry the flame ports. * An incorrectly fitted burner cap/crown. Ensure these components are fitted correctly.
Why is my Electrolux EGG7422S cooking so slowly?
Low heat and slow cooking on your Electrolux Hob can be caused by using incorrect cooking utensils. Make sure you are using pots and pans with bases that fit the size of the burner.
General| Type | Gas Hob |
|---|---|
| Number of Cooking Zones / Burners | 4 |
| Total Power | 8 kW |
| Control Type | Knobs |
| Installation Type | Built-in |
| Surface Material | Stainless Steel |
| Ignition Type | Automatic |
| Material | Stainless Steel |
| Safety Features | Flame Failure Safety Device |
| Gas Type | Natural Gas / LPG |
Safety guidelines for electrical connections and gas component servicing.
Procedures for pipe fitting, reassembly, and correct component usage.
Advice on using original parts and ensuring correct screw placement.
Specific components and parts for city gas conversion.
Step-by-step guide to clean a burner nozzle from oil residue.
Instructions for safely removing the hob for internal component access.
Lists parts for EGG 7422S, including City Gas accessories.
Lists spare parts for the EGG 7432S model.
Lists spare parts for the EHG 7322X model.
Lists spare parts for the EHG 7332X model.
To Next Page