5. Insert the steam inlet seat into the steam outlet along
the direction in the gure and then tighten it turning
clockwise.
6. Place the nozzle on the clothes rack hook.
7. Take out the water tank, unscrew the knob at its bottom, ll water into it. This product
is appropriate for use with tap water. It is recommended to use distilled water or a mix
of 50% distilled, 50% tap water. Never use distilled water only. Never put scented water,
vinegar or ironing aids in the water tank. This may cause brown spitting and staining.
8. Place the water tank in the main unit. Insert the plug into the power socket and then
select the appropriate steam output on the switch button.
9. The product has three gears, Silk
, Cotton/Fiber , and Fur/Linen . It is
suggested to use the “Silk” gear for thinner clothes such as silk clothes and shirts.
The “Cotton/Fiber” gear for thicker clothes such as cotton clothes and chemical ber
clothes and the “Fur/Linen” gear for thicker clothes such as fur coats and linen coats.
Please choose the proper gears according to your actual needs.
10. The power light will be on and steam will be released soon. Hang clothes on the
clothes rack. Always steam the clothes from up to down.
11. The steam hose becomes warm during steaming. This is normal.
NOTE: Do not release steam toward people or animals.
Getting started
Steam hose
Steam inlet seat
Switch button
To Next Page
Loading...
Need help?
General
