Getting started
Before rst use, remove all adhesive remains and gently rub with a dampened cloth. Rinse
water tank to remove foreign particles. When turned on for the rst time, temporary vapors/
odors may occur.
1. Take out the support frame and the clothes rack, press down to install the clothes rack
and lift it. If the clothes rack is stationary, it has been properly installed.
2. Press the clothes rack button, hold the clothes rack support with hands and unfold and
fold the clothes rack to adjust it.
3. Insert the support into the corresponding hole on the product and rotate the support
locking ring to lock the support.
4. Loosen the locking sleeves, lift the support, adjust it to the proper position and then
lock the support locking sleeves.
To Next Page
Loading...
Need help?
General
