Electrolux EGS2103 User Manual

8
EN
Cleaning
1. After use, turn the product o by turning the switch button to 0. Unplug the appliance
and allow the product cool down for more than 30 minutes.
2. Remove the water tank from the steamer and drain the remaining liquid from the tank
and the cavity of the steamer.
3. Open the drain valve to thoroughly drain the surplus water in the heating body of the
main unit and then wipe the surplus water at the junction of the water tank and the
main unit to avoid scaling. After water drainage, close the drain valve.
Rinsing
This process has to be done after 5 times of usage.
1. Turn the product o, unplug the appliance and take both the steam hose and the
support out of the main unit.
2. After the product has cooled down to the room temperature, open the drain valve, put
the main unit under the tap.
3. Open the tap, slowly ll the water into the steam inlet seat, the water should not
overow from the product, last this rinsing process for 1min.
4. After water drainage, close the drain valve and wipe-dry the product.
5. Reassemble the accessories to continue using it.
Drain valve

Electrolux EGS2103 Specifications

General

Brand	Electrolux
Model	EGS2103
Category	Steam Cleaner
Language	English