EasyManua.ls Logo

Electrolux EHD60150P - Control Panel and Safety Locks; Control Panel Locking; Child Safety Lock Activation; Disabling Child Safety Lock

Electrolux EHD60150P
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
fully locks the control panel but not the
sensor field
.
Locking / unlocking the control panel
You can lock the control panel, but not
.
It prevents an accidental change of the heat
setting.
Touch the symbol
. The display comes on.
The Timer still operates.
Touch the symbol
to switch off this func-
tion. The display goes out.
When you switch off the appliance, you also
switch off this function.
The child safety device
This function prevents an accidental opera-
tion of the hob.
Starting the child safety device
Start the hob with
. Do not set the
heat settings .
Touch
for 4 seconds. The indicator
comes on.
Stop the hob with
.
Switching off the child safety device
Start the hob with . Do not set the
heat settings . Touch
for 4 seconds.
The indicator goes out.
Stop the hob with
.
Overriding the child safety device for one
cooking session
Start the hob with
. The indicator comes
on.
Touch
for 4 seconds. Set the heat
setting in less than 10 seconds. You
can operate the hob.
When you stop the hob with
, the child
safety device operates again.
OffSound Control (Switching off and on
the sounds)
Switching off the sounds
Switch off the appliance.
Touch
for 3 seconds. The displays come
on and go out. Touch
for 3 seconds.
comes on, the appliance is in standard
mode. Touch
, comes on, the sound
is off.
When the sound is off, you hear only when
you touch
, Minute Minder or Count Down
Timer come down or when you cover the
control panel.
Switching on the sounds
Switch off the appliance.
Touch
for 3 seconds. The displays come
on and go out. Touch
for 3 seconds.
comes on, because the sound is off. Touch
, comes on, the appliance is in stand-
ard mode. The sound is on.
Helpful hints and tips
Cookware for induction cooking zones
Important! In induction cooking a powerful
electromagnetic field generates an almost
instant heat inside the cookware.
Cookware material
correct: cast iron, steel, enamelled steel,
stainless steel, a multi-layer bottom
(marked as correct by a manufacturer).
not correct: aluminium, copper, brass,
glass, ceramic, porcelain.
Cookware is correct for an induction hob if
... some water boils very quickly on a zone
set to the highest heat setting..
... a magnet pulls on to the bottom of the
cookware.
The bottom of the cookware must be
as thick and flat as possible.
Cookware dimensions : induction
cooking zones adapt to the dimension of
the bottom of the cookware automati-
cally to some limit. But, the magnetic
part of the bottom of the cookware must
have a minimum diameter of approxi-
mately 3/4 of the cooking zones.
Operating noises
If you can hear
cracking noise: cookware is made of dif-
ferent materials (Sandwich construction).
whistling: you use one or more cooking
zones with high power levels and the
8 electrolux

Related product manuals