Need help?Do you have a question about the Electrolux EHG 672 and is the answer not in the manual?
General| Number of Burners | 4 |
|---|---|
| Material | Stainless Steel |
| Ignition Type | Automatic |
| Width | 60 cm |
| Type | Gas |
| Burner Types | Rapid, Semi-rapid, Auxiliary |
| Gas Type | LPG |
| Total Power | 10400 W |
Guidelines for safe installation of the hob, including gas and electrical requirements.
Precautions to prevent children from interacting with or being harmed by the hob.
Recommendations for safe operation of the hob during cooking.
Information on authorized servicing and use of genuine spare parts.
Advice on proper disposal of packaging and old appliances.
Diagram and list identifying the various parts of the hob.
Step-by-step instructions for lighting and operating the hob burners efficiently.
Instructions for regular cleaning of the hob surface, including recommended products.
Guidance on cleaning the pan supports, noting dishwasher safety.
Procedure for cleaning the burner caps, crowns, and removing marks.
Checks to perform before contacting the service centre for non-functional hob issues.
Details of the Electrolux standard warranty, including conditions and exclusions.
Information on how the guarantee applies when moving within Europe.
Directory of local Electrolux Service Force Centres across various UK regions.
Key technical data including dimensions, gas/electric specs, and burner performance.
Safety regulations for hob placement, ventilation, and forbidden room types.
Detailed steps for connecting the hob to the gas supply, including leak testing.
Specifications for the required cut-out size in the worktop for hob installation.
Guidelines for integrating the hob into kitchen furniture, including heat resistance.
Steps for fitting the hob into the cut-out using sealing gasket and clamps.
Instructions for connecting the hob to the 230-240V AC supply, including earthing and plug details.
Requirements for a permanent connection using a double pole switch.
Diagram illustrating the internal electrical connections of the hob's ignition system.
Step-by-step electrical diagnostics including continuity, polarity, and insulation tests.
Flowchart for diagnosing and resolving problems with the hob's ignition system.
Procedure for adjusting the minimum flame setting for each burner.
Method for testing the gas pressure to ensure correct operation.
Steps for safely removing the hob top and associated components.
Procedures for removing hob taps and the mains terminal block.
Instructions for removing the burner assembly and the ignitor unit.
Guidance on converting the hob for use with LPG, including gas rate adjustment.
To Next Page