What to do if my Electrolux EHI955BE Hob won't turn on?
If your Electrolux Hob won't activate, ensure you're not touching multiple sensor fields simultaneously and that the keep warm function isn't active. Also, make sure the control panel is clean from water or fat stains. Try reactivating the hob, setting the heat within 10 seconds, and only touching one sensor field at a time. Clean the control panel.
How to clean stains on Electrolux EHI955BE Hob ceramic glass cooktop?
If you have stains on your Electrolux hob's ceramic glass cooktop, it may be due to improper cleaning. Use a ceramic glass cleaner such as Cerapol to correctly clean the surface.
What to do if a number and ' ' appear on my Electrolux EHI955BE display?
If a number and ' ' appear on your Electrolux hob display, there is an error in the appliance. Disconnect the appliance from the electrical supply for some time by disconnecting the fuse from the electrical system of the house, then connect it again. If it reappears, contact customer service.
What to do if my Electrolux EHI955BE Hob is beeping and deactivating?
If your Electrolux hob is beeping and deactivating, it's likely that something is placed on one or more of the sensor fields. Remove the object from the sensor fields to stop the signal and prevent deactivation.
How to prevent pitting on my Electrolux Hob's ceramic glass?
Pitting on your Electrolux hob's ceramic glass surface is often caused by spills of liquids with high sugar content. These spills must be removed immediately using a special scraper designed for glass.
Why does my Electrolux Hob keep turning off?
If your Electrolux hob keeps deactivating, it could be due to an object placed on the sensor field. Remove the object from the sensor field.
Why is my Electrolux Hob2Hood function not working?
If the Hob2Hood function on your Electrolux hob isn't working, it could be due to an object interrupting the signal between the hob and the hood, or an object covering the control panel. Try moving any items that might be obstructing the signal or covering the control panel.
Why are the sensor fields on my Electrolux EHI955BE getting hot?
If the sensor fields on your Electrolux hob are getting hot, it's likely due to cookware that is too large or placed too close to the controls. Place larger cookware on the rear cooking zones if necessary.
Why isn't the Automatic Heat Up function working on my Electrolux Hob?
If the Automatic Heat Up function isn't working on your Electrolux hob, it could be because the cooking zone is already hot or the highest heat setting is selected. Let the cooking zone cool down sufficiently, as the highest heat setting has the same power as the Automatic Heat Up function.
Why isn't the residual heat indicator lighting up on my Electrolux EHI955BE?
If the residual heat indicator isn't lighting up on your Electrolux hob, it could be that the cooking zone isn't hot enough because it only operated for a short time. If the cooking zone operated sufficiently long to be hot, speak to the service centre.
General| Type | Induction |
|---|---|
| Number of Zones | 4 |
| Total Power | 7400 W |
| Control Type | Touch |
| Power Levels | 14 |
| Timer | Yes |
| Child Lock | Yes |
| Residual Heat Indicator | Yes |
| Automatic Pan Detection | Yes |
| Boost Function | Yes |
| Installation | Built-in |
| Color | Black |
| Width | 900 mm |
| Frame Type | Bevelled Edge |
Guidelines for safe use by children and individuals with reduced capabilities.
Essential safety measures to follow during the installation process.
Critical safety instructions for operating the appliance without risk of injury.
Measures to prevent fire hazards and explosions when cooking with oil or fat.
Explains sensor fields, functions, and displays for EHI635BE/EHI645BE.
Details on sensor fields, functions, and displays specific to the EHI745BE control panel.
Comprehensive guide to sensor fields and their functions for the EHI955BE control panel.
Explains the sensor fields, their functions, and displays for the EHI977BE control panel.
Steps for turning the appliance on/off and how automatic shut-off functions work.
How to choose between Standard, Big Bridge, and Max Bridge modes for the FlexiBridge zone.
Detailed instructions for operating FlexiBridge Big and Max Bridge modes.
How to activate and utilize the Powerslide feature for temperature adjustment.
Instructions for optimal use of the SenseFry function for frying.
To Next Page