To Next Page
P
Patricia GonzalesAug 18, 2025
Why does symbol come on my Electrolux ehi745ba?
- KKathryn MurrayAug 18, 2025
If comes on, the automatic switch-off may be active. To resolve this, deactivate the Electrolux Hob and then activate it again.
Why does symbol come on my Electrolux ehi745ba?
If comes on, the automatic switch-off may be active. To resolve this, deactivate the Electrolux Hob and then activate it again.
What to do if symbol comes on Electrolux Hob?
If comes on, the Child Safety Device or the Lock function is active. Refer to the chapter “Operating instructions.”
Why I cannot activate or operate my Electrolux Hob?
If you cannot activate or operate your Electrolux Hob, it might be because you touched two or more sensor fields simultaneously, the Stop+Go function is active, or there are water or fat stains on the control panel. Try activating the appliance again and setting the heat setting in less than 10 seconds, touching only one sensor field at a time. Also, clean the control panel.
What to do if and number comes on Electrolux ehi745ba Hob?
If you see and a number displayed on your Electrolux Hob, this indicates an error. Try disconnecting the hob from the electrical supply for a short period, or disconnecting the fuse from the house's electrical system and reconnecting it. If the error persists, contact after-sales service.
What does it mean when comes on Electrolux Hob?
If comes on, it indicates an error, possibly due to the cookware boiling dry or the use of incorrect cookware. The overheating protection for the cooking zone or the automatic switch-off may also be active. Deactivate the Electrolux Hob, remove the hot cookware, and after about 30 seconds, reactivate the cooking zone. If the cookware was the issue, the error message should disappear. Allow the cookware to cool and check if it is compatible with the appliance.
Why do sensor fields become hot on Electrolux ehi745ba Hob?
The sensor fields on your Electrolux Hob may become hot if the cookware is too large or placed too close to the controls. If necessary, place large cookware on the rear cooking zones.
What to do if Electrolux ehi745ba makes acoustic signal and deactivates?
The acoustic signal and deactivation of your Electrolux Hob indicates that something is on one or more of the sensor fields. Remove the object from the sensor fields.
Why does my Electrolux Hob deactivate?
Your Electrolux Hob deactivates because there is something on the sensor field. Remove the object to resolve the issue.
How to prevent pitting of ceramic glass surface on Electrolux ehi745ba Hob?
Pitting on the ceramic glass surface of your Electrolux Hob is caused by spillovers of liquid with high sugar content. These spills must be removed immediately with a special scraper for the glass.
Why is there no signal when I touch panel sensor fields on Electrolux ehi745ba?
If there is no signal when you touch the panel sensor fields on your Electrolux Hob, the signals may be deactivated. Activate the signals (refer to “OffSound control”).
Important warnings for safe use, covering injury, burns, electric shock, and fire hazards.
Guidelines for preventing harm to children and individuals with reduced capabilities.
Precautions for safe installation, including clearance and protection from moisture.
Instructions for turning the appliance on/off and automatic deactivation features.
Explains the different heat setting displays and their meanings during operation.
General| Brand | Electrolux |
|---|---|
| Model | ehi745ba |
| Category | Hob |
| Language | English |
