10
Residual Heat Indicator
When an individual cooking zone or
the entire hob is switched off, any re-
sidual heat is shown with an h (for
“Hot”) in the digital display for the ap-
propriate cooking zones.
Even after the cooking zone has been switched off,
the residual heat indicator only goes out when the
cooking zone is cold.
2 You can use the residual heat for melting and
keeping food warm.
1 Important! As long as the residual heat indi-
cator is illuminated, there is a risk of burns.
1 Important! If the power supply is interrupted
the h symbol will also go out and information
about residual heat will no longer be available.
However, it may still be possible to burn your-
self. This can be avoided by taking care when
near the hob.
Child-Safety Device
Acitivating the child-safety device
The child-safety device prevents the cooking zones
being switched on accidentally.
3 The child-safety device can only be activated
when the hob is switched on.
1. Touch the “ON/OFF” control.
2. Touch the Plus and Minus sensors simultaneously
for approx. one second, then release.
3. Touch the Plus sensor field again.
l will be indicated in the digital displays for about
10 seconds. The child-safety device is now acti-
vated.
To Next Page
Loading...
