7
Digital Indicators
Four display fields, one for each cooking zones show
up as follows:
– _ after switch-on and with automatic switch-off by
the safety function,
– 0 when selecting a cooking zone,
– 1 to 9 depending on heat setting selected,
– h with residual heat,
– f with malfunction,
– l with child safety device.
1 Cooking Zone Safety
Cut-out
If one of the cooking zones is not switched off after a
certain time or if the heat setting is not changed, the
corresponding cooking zone switches itself off auto-
matically.
h appears in the ring display for all rings that are
switched on, and _ after they have cooled down.
The rings are switched off at:
3 If one or more cooking zones switch off before
the times indicated see section “What to do
if …”.
Cancelling the Safety Cut-out
To cancel the activated safety cut-out the appliance
must be switched off and then on again using the
ON/OFF I sensor field. After this the cooking zones
are again ready for use.
Switching Off for Other Reasons
Liquid that boils over onto the control panel causes
all cooking zones to switch off immediately.
If you place a wet cloth on the control panel it has
the same effect. In both cases the appliance has to
be switched on again using the mains switch I after
removing the liquid or cloth.
Before Using for the First Timeg for the First TimeTime
Initial Cleaning
Wipe the ceramic glass surface with a damp cloth.
1 Important: Do not use any caustic, abrasive
cleaners! The surface could be damaged.
• Heat setting 1 - 2 after 6 hours
• Heat setting 3 - 4 after 5 hours
• Heat setting 5 after 4 hours
• Heat setting 6 - 9 after 1.5 hours
To Next Page
Loading...
