Unpackin
Washer
Removing foam packaging
1. Temporarily remove door tape.
2. Open washer door and remove everything from
the drum.
3. Close door and reapply door tape.
4. Using a rug, blanket or piece of cardboard to
protect the floor, carefully lay the washer on it's
back.
T"
5. Remove styrofoam base and shipping plug and
set them aside.
6. Carefully return the washer to an upright posi-
tion.
7. Carefully move the washer to within 4 feet (1 m)
of its final location.
To Next Page
Loading...
