Electrolux EIS8648 - Page 12

Do not put salt into the
water, this may affect the
procedure.
To leave the Menu, touch or the right
side of the display, outside of the pop-up
window.
5.4 Food Sensor pairing
Originally, your hob is paired with the
Food Sensor upon delivery.
If you replace the Food Sensor with a
new one, you need to pair it with your
hob.
1. Touch .
Select Settings > Food Sensor > Pairing
from the list.
2. Touch Forget to disconnect the
previous Food Sensor.
3. Touch Pair next to the cooking zone.
A pop-up window appears.
4. Enter the five-digit code engraved on
your new Food Sensor, using the
number pad.
5. Touch OK to confirm.
Your Food Sensor is now paired with the
hob.
Always calibrate the Food Sensor after
pairing.
To leave the Menu, touch or the right
side of the display, outside of the pop-up
window.
5.5 Menu structure
Touch to access and change the
settings of the hob or activate some
functions.
To leave the Menu, touch or the right
side of the display, outside of the pop-up
window. To navigate through the Menu
use or .
The table shows the basic Menu
structure.
Assisted Cooking Refer to the Assisted Cooking section in "Daily use".
Hob Functions Sous Vide
Thermometer
Melting
www.electrolux.com12