• The feeding cable must not touch to the hot surface of the product. In case
the feeding cable is damaged, contact to Authorized Service. The cable
must be changed by the authorized service.
• The wrong electric connection may damage your appliance. Such damage
is not in guarantee extent.
• The appliance is adjusted as appropriate for 220-240 Volts and 400V 3N
Volts of electricity. If the network electricity is different than this informed
value, immediately contact to our authorized service.
• The electric cable must not touch to the hot parts of appliance and the
back part of the appliance. Otherwise the electric cable of appliance may
be damaged. And this situation may cause short circuit.
• The producer firm declares that it has no responsibility against any kind of
damages and losses that emanate from the following security norms.
3. 6 GENERAL WARNINGS AND MEASURES
• Your appliance is produced in accordance with the related security
instructions connected with electrical appliance. The maintenance and
repair works must be made just by the authorized service technician who is
trained by the producer firm.
• Installation and repair works without following rule
s may endanger you.
To Next Page
Loading...
