Electrolux EKM6645X - Anti-Tilting Kit Installation

9
Document bag contains an anti-tilting kit. Anti-tilting bracket (1) should be removed
from the kit and installed onto the wall with the following measures as shown in the
figure. Height can be adjusted by loosing the screw of the bracket. The adaptor (2)
that will provide connection of the anti-tilting bracket to the oven is preinstalled to
the oven with 4 screws. Height can be adjusted by loosening the 4 screws of the
adaptor. The oven is leaned backwards with an angle so that the anti-tilting bracket
fits into the adaptor and then it is pushed forwards forwards.
For EKM6645X;