Electrolux EMS3085X - Automatic Protection Mechanism

-24-
-23-
Ingredient: 2 eggs
Steps:
1. Base pot: add 200ml of water into the base plate
2. Inner pot: crack eggs and put in a pot, add 200ml water with a bit salt, beat the egg
mixture together
3. Put the inner pot into the base pot and lock up the cover.
4. Select weight as below then time and power will follow default setting automatically
as below:
S-3 Steam Egg (portion)
Weight（portion）
1
time
7:0
0
power
MED
Ingredient: dim sum
Steps:
1. Base pot: add 200ml of water into the base plate
2. Inner pot: put the dim sum into the pot
3. Put the inner pot into the base pot and lock up the cover.
4. Select weight as below then time and power will follow default setting automatically
as below:
Weight（g）
100
200
300
time
2：00
3：30
5：00
power
Ingredient: rice 200-400g
Steps:
1. Base pot: add 200ml of water into the base plate
2. Inner pot: cooked rice which need to reheat
3. Put the inner pot into the base pot and lock up the cover.
4. Select weight as below then time and power will follow default setting automatically
as below:
Weight（g）
200
300
400
time
3:00
4:00
5:00
power
HI
S-5 Steam Rice (g) --reheat
S-4 Steam Dim Sum (g) --reheat
Note: 1.Steam cooking can only be used together with steam pot.
2.The menu you set up here will remain until you reset it or cut the power.
Setting Child Lock
The lock prevents unsupervised operation by children.
To set the child lock: In standby mode, press STOP/ CLEAR button for 3 seconds, then a
beep will sound. In the lock state, the oven can’t be operated.
To cancel the child lock: Press STOP/ CLEAR button for 3 seconds, then a beep will sound,
and the oven can be operated.
Automatic Protection Mechanism
High Temperature Protection: while entering into super high temperature protection
status, the system sounds beeps and the display shows “E01” until user press STOP/CLEAR
button to return normal condition. Please open the door to cool the oven cavity or call for
consumer service to check.
Low Temperature Protection:
while entering into super low temperature protection
status, the system sounds beeps and the display shows “E02” until user press STOP/CLEAR
button to return normal condition. Please call for consumer service to check.
Sensor Malfunction Protection: when the sensor is short circuited, the system enters into
protection mode and sound beeps, the display shows “E03” until user press STOP/CLEAR
pad to return normal condition. Please call for consumer service to check and replace the
faulty sensor.
MED