Repairs to the appliance are only to
be carried out by qualified service
engineers. Considerable danger to
the user may result from improper
repairs.
If the appliance has been wrongly
operated, the visit from the custom-
er service technician or dealer may
not take place free of charge, even
during the warranty period.
Advice on cookers with metal fronts:
Because of the cold surface at the
front of the cooker, opening the
oven door during (or just after) bak-
ing or roasting may cause the glass
to steam up.
Installation Instructions
The new appliance may only be in-
stalled and connected by a regis-
tered installation engineer. Please
comply with this. If you do not, any
damage resulting is not covered by
the warranty.
If the supply cord is damaged, it must be
replaced by the manufacturer, its service
agent or similarly qualified persons in or-
der to avoid a hazard.
Safety information for the installer
• The set-up of the electrical installation
is arranged so that the appliance can
be isolated from the mains with a min-
imum 3mm all-pole contact separa-
tion.
Suitable separation devices include e.
g. cut-outs, fuses (screw fuses are to
be taken out of the holder), RCD’s and
contactors.
• The site must provide a connection to
the electrical supply by means of a
socket that is accessible and outside
the coordination space.
• Anti-shock protection must be provi-
ded by the installation.
• The built-in unit must meet the stability
requirements of DIN 68930.
installation instructions electrolux 45
To Next Page
Loading...
