26
TO CLEAN THE INNER GLASS DOOR
PANELS
Clean the inner glass door panels using a soft cloth
and hot s oapy water to which a little washing up liquid
has been added. If the inner panel is heavily soiled,
hob cleaner may be used. Do not use abrasive
cleaning materials on the door glass. Ensure that all
parts are well rinsed and thoroughly dried before
attempting to replace the glass.
REPL ACI N G A N OVE N L IG H T B UL B
Disconnect the appliance from the electricity
supply before re placi ng the b ulb.
The type of bulb required is a 300°C, 25 watt small
Edison Screw.
1. M ake sure the ap plia nce i s c ool bef ore you rep lace
a bulb
2. Open the door and remove the shelves and
wirew or k runne rs.
3. Pull the glass bulb cover towards you and then pull
it off. If necessary use a screwdriver to carefully
lever off the cover, taking care not to damage the
cavity.
4. Unscrew the bulb by turning it to the left.
5. Fit a new bulb and then replace the glass bulb
cover.
6. Refit the wirework runners and replace the shelves.
7. Restore the electricity supply and reset the time of
day.
To Next Page
Loading...
