What to do if my Electrolux EP32-27SWA Air Cleaner produces a strange smell?
If you perceive a burning smell, please disconnect the unit. If the VOC filter is at the end of its life, change to a new filter.
What to do if my Electrolux Air Cleaner produces a loud noise?
If your Electrolux Air Cleaner is making loud or abnormal noises, ensure that the plastic bag around the filter has been removed. Also, make sure the air inlet and outlet grills are unobstructed and that there is at least 30 cm of clearance between the unit and any nearby surface.
What to do if the filter icon is lit on Electrolux Air Cleaner after changing filters?
If the filter icon is lit on your Electrolux Air Cleaner even after changing the filter, long press the MODE button for 3 seconds to reset the filter indication.
Why is my Electrolux Air Cleaner emitting a strange smell?
If your Electrolux Air Cleaner is emitting a strange smell, the VOC filter is likely at the end of its life. Please change to a new filter.
Why is my Electrolux EP32-27SWA Air Cleaner running at max fan speed?
The Electrolux Air Cleaner's PM sensor is highly accurate. It's normal for the purifier to react to poor air quality by increasing fan speed. If it is in MANUAL mode, adjust the fan speed using the slider on the control panel or in the Electrolux App. If it is in SMART mode, check the air quality indicator. If PM values are constantly at 999-1000, the sensor may be clogged. Clean the sensor as described in section 23.
What to do if Electrolux Air Cleaner is running but air quality does not improve?
If your Electrolux Air Cleaner is in a room larger than recommended, it will take longer to improve air quality. Be patient and keep the unit at the highest feasible speed. If in SMART mode, monitor air quality levels in the Electrolux App for 20 minutes. If there's no improvement, switch to MANUAL mode and increase the fan speed. If there is still no improvement, close any open doors or windows and run the unit at the highest fan speed for 20 minutes.
What to do if Electrolux Air Cleaner produces a loud noise?
Ensure that the plastic bag around the filter has been removed. Make sure the air inlet and outlet grills are unobstructed and that there is at least 30 cm of space between the unit and any nearby surface.
What to do if the filter icon is lit on Electrolux EP32-27SWA even after changing filters?
After changing the filter on your Electrolux Air Cleaner, long press the MODE button for 3 seconds to reset the filter indication.
Why is my Electrolux EP32-27SWA Air Cleaner running at lowest fan speed?
This is normal if your air quality is very good. If in MANUAL mode, check the fan speed on the product control panel display or within the Electrolux App and adjust it to the desired level. If the PM2.5 value is high, check the filter change icon on the product control panel or within the Electrolux App and replace the filter if lit.
General| Model | EP32-27SWA |
|---|---|
| Type | Air Cleaner |
| Room Size | 30 m² |
| Coverage Area | 30 m² |
| Filter Type | HEPA |
| Filtration | 3-stage |
| Features | Auto Mode, Sleep Mode, Timer |
| Power Consumption | 45 W |
To Next Page