Electrolux EPE 800 User Manual

Key safety warnings and initial setup procedures for safe operation.

Details cooling, heating, power consumption, and dehumidification capacities.

Lists unit dimensions, air delivery, electrical supply, and weight.

Labels and describes components visible on the front and rear of the unit.

Lists and illustrates the accessories provided with the unit.

Steps for installing a sleeve through a wall for fixed cooling installation.

Method for temporary installation using a window nozzle and suction pads.

Instructions for heating mode, not requiring exhaust hose.

Setup for DRY mode, similar to cooling installation.

Setup for dehumidification mode, requiring drain connection.

Checks for power supply, fuse, socket, and grounding.

Cools, dehumidifies, and filters air, maintaining desired temperature.

Heats and filters air, maintaining desired room temperature.

Automatically switches between cooling and heating based on room conditions.

Dehumidifies and softly cools, ideal for high humidity.

Recirculates air or automatically adjusts fan speed for comfort.

Prevents cold drafts and uses remote for temperature sensing.

Control unit operation automatically by time or for sleep.

Explains filter indicator, operation signals, and buzzer alerts.

Allows direct operation and retains last settings after power loss.

Prevents unauthorized changes to settings via the remote control.

Ensures unit is connected, indicator is lit, and remote battery is ready.

Proper aiming, distance, handling, and placement of the remote control.

Explains Stand-by, Operation, Timer, Filter, Cooling, and Heating indicators.

Describes the MODE/OPERATION button and RESET/CANCEL button functions.

Component that receives infrared signals from the remote control.

START/STOP, MODE, FAN SPEED, TEMP buttons and LCD display.

I FEEL, SLEEP, TIMER, LOCK buttons for enhanced operation.

Buttons for setting timer, clock, and clearing settings.

Steps to start and stop the air conditioner using the START/STOP button.

How to select ventilating mode and adjust fan speed.

How to activate cooling mode and adjust fan speed/temperature.

Operation sequence for cooling with automatic fan speed adjustment.

How to activate heating mode and adjust fan speed/temperature.

Operation sequence for heating with automatic fan speed and HOT KEEP.

Steps to activate auto mode based on room temperature and settings.

How to activate dry mode for dehumidification with soft cooling.

How to adjust the temperature setting using the remote control buttons.

Activating and using the I FEEL function for personalized comfort.

Activating the sleep function for comfortable night-time operation.

How to set timer for ON, OFF, or ON AND OFF operations.

Procedure to set a start operating time for the unit.

Procedure to set a stop operating time for the unit.

Procedure to set both start and stop times for operation.

How to cancel any active timer settings.

How to view the current room temperature on the remote display.

Procedure to set the current time on the remote control.

How to lock/unlock remote control buttons to prevent changes.

Steps to turn off the unit and its standby status indicator.

How to operate the unit directly from the control panel.

Instructions on how to remove, clean, and reinstall the air filter.

How to wipe and clean the unit's exterior surfaces.

Checks to perform at the beginning of the operating season.

Guidelines for placement and protection of indoor unit and remote.

Steps for replacing batteries in the remote control.

Safety advice for operating environment, children, grounding, and handling.

Precautions regarding fixed installation, exhaust, and indicator lights.

Checks for power, plug, or remote control issues.

Addresses temp settings, drainage, or full water pans.

Solutions for open windows, heat sources, capacity, and clogged filters.

Checks for signal obstruction, distance, or light interference.

Addresses low temp settings, heating elements, and filter reset.