Programme Dishwasher
load
Degree of
soil
Programme phases Options
5)
All All • Prewash
1)
This programme offers the most efficient use of water and energy consumption for crock‐
ery and cutlery with normal soil. This is the standard programme for test institutes. This pro‐
gramme is used to assess compliance with the Ecodesign Comission Regulation (EU)
2019/2022.
2)
Automatic door opening during the drying phase. Refer to "Settings".
3)
The appliance senses the degree of soil and the quantity of items in the baskets. It auto‐
matically adjusts the temperature and the quantity of water, the energy consumption and the
programme duration.
4)
This programme is designed to clean the inside of the appliance effectively and efficient‐
ly. It removes limescale and grease buildup. The programme should be run at least once
every 2 months with a descaler or a cleaning product designed for dishwashers and without
any load.
5)
With this programme, you can quickly rinse off food remains from dishes and prevent
odours forming in the appliance. Do not use detergent with this programme.
5.1 Consumption values
Programme
1)2)
Water (l) Energy (kWh) Duration (min)
9.9 0.704 240
9.5 0.952 160
9.5 0.826 90
9.1 0.697 60
8.8 0.604 30
9.5 0.952 170
8.1 0.440 60
3.4 0.014 15
1)
The pressure and the temperature of the water, the variations of the mains supply, the
options, the quantity of dishes and the degree of soil can change the values.
2)
The values for programmes other than ECO are indicative only.
5.2 Information for test institutes
To receive the necessary information for conducting performance tests (e.g. according
to: EN60436 ), send an email to:
info.test@dishwasher-production.com
In your request, include the product number code (PNC) from the rating plate.
For any other questions regarding your dishwasher, refer to the service book provided
with your appliance.
ENGLISH 9
To Next Page
Loading...
Need help?
General
