7.5 Rear spacers
• Install the spacers provided within the
accessory bag as shown in the figure.
• Install the adhesive spacers on the back
side of the appliance.
7.6 Levelling
When placing the appliance ensure that it
stands level. If necessary adjust the feet us-
ing the adjustment spanner supplied.
7.7 Door reversibility
1
34
2
To change the opening direction of the
door, do these steps:
• Remove the plug from the power.
• Remove the ventilation grille. Remove the
upper filling and install it on the opposite
side of the grille.
• Remove the pedal hole cover and install
the cover provided in the accessory bag
on the opposite side.
• Lay down the appliance back side down
on a wooden support.
• Unscrew the hinge (1) and remove the
cover plate (2) and the support (3).
• Remove the cover (4) on the opposite
side and install the support (3) the cover
plate (2) and the hinge (1). Install the cov-
er (4) on the opposite side.
14
www.electrolux.com
To Next Page
Loading...
