Electrolux EVD29900AX - Before Using for the First Time; Control Panel

7 www.electrolux.com
4. BEFORE USING FOR THE FIRST TIME
WARNING!
Refer to the chapters on safety.
4.1. Cleaning for the first time
 Remove all the parts from the
appliance.
 Clean the appliance before you use it
for the first time.
4.2. First connection
 Connect the appliance to the power
supply.
 Use the ON/OFF switch -1- locate to
the left of the control panel to switch
the appliance on.
 Before using the appliance, proceed
with the “Conditioning Program” as
shown below:
 Close the cover with the empty tank.
 Select program P7 using the keys -9-
and -10-.
 Press Start -8-.
 Wait for the cycle to end (about 3
minutes).
 At the end of the cycle, the display
shows P7 again.
 Now the machine is ready for use
5. CONTROL PANEL
ON/OFF switch
Selection button
ON/OFF LED
Start button
Vacuum function LED
“DECREASE” button, reduces the set function
values and selects the programs
Sealing function LED
“INCREASE” button, increases the set
function values and selects the programs
Air return function LED
Display - displays the selected functions and
the corresponding setting data.
Stop button