38 EVEP613SA, EVEP615SA, EVEP616BA, EVEP618BA
OPERATING SEQUENCE
Turning the oven on
• Switch on the oven by touching the
ON/OFF
symbol. The LCD control panel will come on and
inform you that you need to select a cooking
function.
• If you do not select a function within 20 seconds the
oven will turn off.
Select a cooking function
The oven will have a selection of functions. Press the
function
or function symbols as many times as
necessary until the desired function appears.
Cooking suggestions will appear under the function
name and suggested cooking temperatures will appear
above the temperature selector.
If no other symbol is touched within 8 seconds the oven
will switch on and begin to heat up to the displayed
temperature.
Selecting a temperature
The temperature is electronically controlled.
The temperature can be selected within the range of 30°C
to 250°C and can be adjusted at any time. To set the
temperature, press the temperature
and temperature
symbols to reach the desired setting.
Touch
OK, or if no further changes are made within
8 seconds the oven begins to heat up to the set
temperature. The current oven temperature will appear
above set temperature. This will change as the oven heats
up and the background colour will change from grey
to red.
When the temperature is reached, ‘Set temperature
reached’
will appear and only the target temperature will
be displayed.
Turning the oven off
Touch the
ON/OFF symbol to switch off the oven.
As the appliance cools down “cooling” will be displayed
until the oven reaches approximately 100°C.
To Next Page
Loading...
Need help?
General
