6.4 Start/Pause
This button allows you to start or to
interrupt the selected programme.
6.5 Indicators
The light A illuminates when the machine
is performing the washing phase.
The light B illuminates when the machine
is rinsing.
The light C illuminates when the machine
is spinning.
The light D illuminates at the end of the
washing cycle.
The light E indicates if the door can be
opened:
• The light is on: the door cannot be
opened.
• The light is off: the door can be
opened.
• The light is flashing: the door can
soon be opened.
6.6 Spin Reduction Dial
By turning the spin speed selector you
can change the spin speed of the
selected programme or to select Rinse
Hold or No Spin 0 option.
6.7 Programme Selector Dial
It allows you to switch the appliance
on/off and/or to select a programme.
7. BEFORE FIRST USE
1. Make sure that all transit bolts have
been removed from the appliance.
2. Connect the mains plug to the mains
socket.
3. Open the water tap.
4. Pour approx. 100 ml of detergent
straight into the drum.
5. Set and start a programme for cotton
at the highest temperature without
laundry. This removes all posssible
dirt from the drum and the tub.
8. DAILY USE
WARNING!
Refer to Safety chapters.
8.1 Loading the laundry
1. Open the appliance door
2. Empty the pockets and unfold the
items before you put them in the
appliance.
3. Put the laundry in the drum, one item
at a time.
Make sure not to put too much laundry in
the drum.
4. Close the door firmly.
ENGLISH 11
To Next Page
Loading...
