Electrolux EWF12832 - Before First Use; Daily Use; Start Up Guide

12 www.electrolux.com
1.
Press the On/Off button to turn on the
washing machine.
2.
Turn the program selector dial
to the required program.
The relevant light will light up.
-
The buzzer will sound.
-
Once you selected a wash
program, the program selected
will stay at that position for the
whole of the wash.
-
The selector dial can be turned
either clockwise or anticlockwise.
-
The display shows the level of
the Time Manager, the program
duration and the indicators of
the phases of the program.
-
BEFORE FIRST USE4.
Ensure that the electrical and water
connections comply with the
installation instructions.
Put 2 litres of water in the detergent
compartment for washing phase.
This activates the drain system.
1.
2.
3.
Select a Cottons cycle at 90 °C,
without any laundry in the machine, to
remove any manufacturing residue from
the drum and tub. Pour 1/2 a measure
of detergent into the dispenser drawer
and start the machine.
DAILY USE5.
Step 1 - Setting A Program For Washing
5.1 Four Steps Start Up Guide
Connect the mains plug to the mains socket.
Turn the water tap on.
1
3
5
4
2