Electrolux EWF14012 - Buzzer Sounds and Programs

10 www.electrolux.com
3.15 Programs + Options
Program;
Temperature
Cottons;
90 °C to
(
Cold water)
White and coloured
cotton with heavy level
of soil;
max. load 10 kg.
- Wash
- Rinses
- Long spin
Active
Active
Active
Active
No
Active
Spin: 1400 to 400 rpm,
No Spin, Rinse Hold,
Extra Silent,
Spin: 1200 to 400 rpm,
No Spin, Rinse Hold,
Extra Silent,
Spin: 1200 to 400 rpm,
No Spin, Rinse Hold,
Extra Silent,
Spin: 1400 to 400 rpm,
No Spin, Rinse Hold,
Spin: 800 to 400 rpm,
No Spin, Rinse Hold,
Prewash, Easy Iron, Rinse +,
Vapour
1)
, Adjust Time,
Delay Start
Type of load; Max. weight
of load (dry clothes)
Cycle
description
Options can be
combined
“JetMix”
( )
Mixed;
60 °C to
(
Cold water)
Synthetic or mixed
fabric items with normal
level of soil;
max. load 4 kg.
- Wash
- Rinses
- Short spin
Prewash, Easy Iron, Rinse +,
Vapour
1)
, Adjust Time,
Delay Start
Delicates;
40 °C to
(
Cold water)
Quick 18;
30 °C
Refresh
Cottons
Delicate fabrics as
acrylics, viscose,
polyester items with
normal soil;
max. load 4 kg
- Wash
- Rinses
- Short spin
Prewash, Rinse +, Vapour
1)
,
Adjust Time, Delay Start
Synthetic and mixed
fabric items. Light soil
and items to freshen
up; max. load 1.5 kg
- Wash
- Rinses
- Short spin
Vapour program for White
and coloured cotton. This
cycle removes odours and
helps to dewrinkle the
laundry; max. load 1.5 kg.
Clothes
tumble in
vapour.
Delay Start
Delay Start
Energy
Saver;
60 °C
2)
,
40 °C
White and colourfast,
cotton with normal soil.
Set this program to have a
good washing results and
decrease the energy
consumption. The time of
the washing program is
extended; max. load 10 kg.
- Wash
- Rinses
- Long spin
Prewash, Rinse +, Vapour
1)
,
Adjust Time, Delay Start
-
3.14 Buzzer Sounds
The program is completed.
The appliance has a malfunction.
The buzzer sounds operate when:
press “Rinse +” and “Vapour” touchpads
at the same time for 3 seconds, and listen
for “BEEP, BEEP”.
If you want to disable the buzzer sound
(except for event of
appliance malfunction),
To return to default configuration press
these 2 touchpads at the same time for 3
seconds, and listen for “BEEP”.