How to fix Electrolux EWF14113 Washer that does not start?
If your Electrolux Washer doesn't start, make sure the door is firmly closed. Also, check that the plug is properly inserted into the power socket and that there is power at the socket. Ensure you've pressed the Start/Pause button and that the “Delay End” function isn't active. In case of unstable main power supply, wait until it stabilizes; the appliance will then start automatically.
What to do if my Electrolux Washer leaks water on the floor?
If there is water on the floor, it may be due to using too much or unsuitable detergent, which creates excessive foam. Try reducing the amount of detergent and ensuring you use the correct type. Inspect the water inlet hose connections for any leaks. If the drain hose is damaged, call Service.
Why my Electrolux EWF14113 does not empty or spin?
If your Electrolux Washer does not empty or spin, check the drain hose to ensure it is not squashed or kinked. Also, the drain pump might be clogged, so clean the drain filter. If the “Extra Silent” or “Rinse Hold” option is selected, press the Start/Pause button to drain the water or select a spin program. If the laundry is unevenly distributed, pause the machine and redistribute it manually.
Why Electrolux Washer is not filling with water?
If the Electrolux Washer is not filling with water, make sure the water tap is open. Check the inlet hose for any squashes or kinks and ensure it is properly connected. Also, the filter in the inlet hose might be blocked, so clean it. Ensure that the door is properly closed.
What to do if Electrolux EWF14113 Washer door will not open?
If the door of your Electrolux Washer will not open, it may be because the program is still running; wait until the cycle is complete. If there is water in the drum, you need to drain it to open the door. This problem may also indicate a failure of the appliance, in which case you should contact Service.
Why is my Electrolux EWF14113 vibrating so much?
If your Electrolux Washer is vibrating or noisy, ensure that the transit bolts and packing have been removed and that the support feet are properly adjusted. Unevenly distributed laundry in the drum can also cause this, so pause the machine and redistribute it manually. If there is very little laundry, add more. Unstable floors, such as wooden floors, can also contribute to vibration; refer to the “Positioning” section for guidance.
Why spinning starts late in my Electrolux Washer?
If spinning starts late or the Electrolux Washer doesn't spin, the electronic unbalance detection device may have activated because the laundry is not evenly distributed in the drum. To resolve this, pause the machine and manually redistribute the laundry.
How to improve washing results with Electrolux Washer?
If you're experiencing unsatisfactory washing results with your Electrolux Washer, consider the following: you may be using too little or unsuitable detergent, so increase the quantity or switch to a different detergent. Treat stubborn stains before washing with commercial products. Ensure you've selected the correct temperature for the load. Avoid excessive laundry loads.
Why Electrolux EWF14113 cycle time is longer than displayed?
If the cycle time on your Electrolux Washer is longer than displayed, it could be due to detergent overdose. Reduce the detergent quantity or use a different type. An unbalanced load can also cause this issue, so redistribute the laundry manually in the drum and restart the spin phase.
Advises on supervising children and keeping detergents out of reach.
Explains how to activate/deactivate the child safety lock for the door.
Covers general safety precautions, hot surfaces, and item types not to wash.
Details safety aspects and professional requirements for installing the appliance.
Outlines general guidelines and precautions for using the washing machine.
Identifies and lists all external and internal parts of the washing machine.
Describes the Load Sensor and Detergent Quantity Indicator features.
Presents a comprehensive chart of wash programs, temperatures, loads, and fabric types.
Shows which options can be combined with each wash program.
Describes how to activate and deactivate the child lock feature.
Explains how to start, pause, resume, and add clothes during a cycle.
Explains how to use the detergent dispenser for powder and liquid detergents, and fabric softener.
Details the correct type and amount of detergent to use for optimal results.
Lists common malfunctions, their causes, and solutions, including alarm codes.
Explains how to open the door manually in case of power failure or malfunction.
Instructions for correctly positioning and leveling the washing machine for stable operation.
Guidelines for safely connecting the washing machine to the electrical supply.
General| Door color | Chrome |
|---|---|
| Door hinge | Left |
| Control type | Touch |
| Display type | LCD |
| Loading type | Front-load |
| Product color | White |
| Built-in display | Yes |
| Appliance placement | Freestanding |
| Current | 10 A |
| Connected load | 2100 W |
| AC input voltage | 220 V |
| AC input frequency | 60 Hz |
| Energy consumption washing per cycle | - kWh |
| Drum capacity | 11 kg |
| Delay start (max) | 20 h |
| Spin-drying class | - |
| Maximum spin speed | 1400 RPM |
| Minimum spin speed | 400 RPM |
| Noise level (wash) | - dB |
| Load balancing system | No |
| Cycle time (quick washing program) | 18 min |
Weight and Dimensions| Depth | 669 mm |
|---|---|
| Width | 600 mm |
| Height | 850 mm |
To Next Page